Table of Contents
Advertisement
SuperStorage Server 6048-E1CR90L User's Manual
Device Settings
This item displays the base I/O port address and the Interrupt Request address for a serial
port specified by the user. The default setting for Serial Port 1 is IO=3F8h IRQ=4, and for
Serial Port 2 is IO=2F8h IRQ=3.
Change Port (1) Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to a
serial port specified.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 10,
11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7,10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),
and (IO=2E8h; IRQ=3, 4, 5, 6, 10, 11, 12).
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 10,
11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),
and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12).
Device Mode
Use this item to select the SUART Clock source for a serial port specified by the user. The
options are 24MHz/13 and 24MHz.
Serial Port 2 Attribute (Available on the Serial Port 2 Configuration Only)
Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redirection.
The options are COM and SOL.
Serial Port Console Redirection
COM 1 Console Redirection
(COM 1) Console Redirection
Select Enabled to enable COM Port 1 Console Redirection, which will allow a client machine
to be connected to a host machine at a remote site for networking. The options are Disabled
and Enabled.
*If the item above set to Enabled, the following items will become available for configuration:
(COM1) Console Redirection Settings
Terminal Type
Use this item to select the target terminal emulation type for Console Redirection. Select
VT100 to use the ASCII Character set. Select VT100+ to add color and function key
support. Select ANSI to use the Extended ASCII Character set. Select VT-UTF8 to use
UTF8 encoding to map Unicode characters into one or more bytes. The options are ANSI,
VT100, VT100+, and VT-UTF8.
94
Advertisement
Table of Contents
