Install Procedure - Supermicro SuperStorage Server 6048R-E1CR90L User Manual

SuperStorage Server 6048-E1CR90L User's Manual

Install Procedure

Installing Memory
1. Remove power from the motherboard as described in Section 3.1.
2. Starting with P1-DIMMA1, push the
release tabs outwards on both ends of
the DIMM slot to unlock it.
3. Align the key of the DIMM with the
receptive point on the memory slot and
with your thumbs on both ends of the
module, press it straight down into the
slot until the module snaps into place.
4. Press the release tabs to the locked position to secure the DIMM module into the slot.
5. Repeat the procedure for the remaining DIMM modules in the order detailed in the
previous section.
To remove a DIMM module, unlock the release tabs then pull the module from the slot.
Caution: Exercise caution when installing or removing memory modules to prevent damage
to the DIMMs or slots.
Note: Visit the product page on the Supermicro website for possible updates to memory
support (www.supermicro.com).
Release Tabs
Press both notches straight
down into the memory slot.
40
Notches