Supermicro SuperStorage Server 6048R-E1CR90L User Manual page 64

SuperStorage Server 6048-E1CR90L User's Manual
VGA Enable/Disable
Close pins 2 and 3 of jumper JPG1 to disable the onboard VGA port using the onboard
graphics controller. The default setting is Enabled.
LAN1/2 Enable/Disable
Close pins 1 and 2 of Jumper JPLX1 to enable the onboard 710 LAN controller located at
UX1. The default setting is Enabled.
3008 SAS Controller Enable
Use Jumper JPS1 to enable or disable the 3008 SAS controller located at US1, and use
Jumper JPSX1 for the SAS controller located at USX1.
SAS 3008 Controller Enable
Jumper Assignments
Jumper
JPS1
JPSX1
BMC Enable/Disable
Jumper JPB1 allows you to enable the embedded ASpeed AST2400 Baseboard Management
Controller (BMC) to provide IPMI 2.0/KVM support on the motherboard.
VGA Enable/Disable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
LAN1/2 Enable/Disable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
Controller Supported
for SAS Controller
located at US1
for SAS Controller
located at USX1
BMC Enable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
64
Definition
Enabled
Disabled
Definition
Enabled
Disabled
SAS 3008 Controller Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 SAS Enable (Default)
Pins 2-3 SAS Disabled
Definition
BMC Enabled
Disabled