Table of Contents
Advertisement
Manufacturer Mode Select
Close the Manufacturer Mode (ME) Select Jumper JPME2 to bypass SPI flash security and
force the system to use the Manufacturer mode. ME mode allows the user to flash the system
firmware from a host server to modify system settings of a machine at a remote location.
4.5 LED Indicators
SFP/LAN1 - SFP/LAN4 LED Indicators
The SFP Ethernet ports have two LEDs. On each port, one LED indicates activity when
flashing while the other LED may be green, amber or off to indicate the link speed of the
connection.
Link LED
IPMI_LAN LED
The yellow LED on the right indicates activity, while the multi-color LED on the left indicates
the speed of the connection.
LAN 1/LAN 2
IPMI LAN
Link LED
Activity LED
IPMI LAN
(X8ST3-F)
Power LED Indicator
The power LED is located at LE2 on the motherboard.
Manufacturer Mode
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Normal
Pins 2-3
Manufacturer Mode
Activity LED
Link (Left)
Activity (Right)
Power Indicator LEDs
Color/State
Definition
Green
Power to system
Off
Power cord disconnected
65
Chapter 4: Motherboard Connections
LAN LED
Link Speed Indicator
LED Color
Definition
No connection, 10 Mb/s,
Off
or 100 Mb/s
Green
10 Gb/s
Amber
1 Gb/s
IPMI LAN LED
LED Color
Definition
Amber: Solid
1 Gb/s
Green: Solid
100 Mb/s
Yellow: Blinking
Active
Advertisement
Table of Contents
