Set Qos-Group - Cisco Nexus 7000 Series Command Reference Manual

set qos-group

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
set qos-group
To assign the QoS group identifier for a class of traffic in a type qos policy map, use the set qos-group
command. To remove the assigned value from the class, use the no form of this command.
Syntax Description
qos-group-value
Defaults
None
Command Modes Policy map type qos class configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines You can set the QoS group identifier value only in ingress policies.
This command does not require a license.
Examples This example shows how to assign a QoS group identifier for a class of traffic in a type qos policy map:
switch(config)# policy-map my_policy1
switch(config-pmap-qos)# class traffic_class2
switch(config-pmap-c-qos)# set qos-group 100
switch(config-pmap-c-qos)#
Related Commands Command
show policy-map
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-82
set qos-group qos-group-value
no set qos-group qos-group-value
QoS group value to assign for this class of traffic. Valid values are from 0
to 126.
Modification
This command was introduced.
Description
Displays policy maps and statistics.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01