Cisco Nexus 7000 Series Command Reference Manual page 35

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
match cos (class map type network-qos)
To define the class of traffic in a type network qos class map, use the match cos command. To remove
the match configuration, use the no form of this command.
Syntax Description
cos-list
Defaults None
Command Modes Class-map type qos configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
5.1(1)
Usage Guidelines To specify a list of values, use one of the following options:
•
•
This command does not require a license.
Examples
This example shows how to match on the CoS value for a type network qos class map:
switch(config)# class-map type network-qos match-any eth
switch(config-cmap-nqos)# match cos 3-5
switch(config-cmap-nqos)#
Related Commands Command
show class-map
OL-23378-01
match cos cos-list
no match cos cos-list
CoS value or list of specified CoS values. Valid values are from 0 to 7.
Modification
This command was introduced.
Specify a range of values by separating each value with a dash.
Specify a noncontiguous list of values by separating each value by a comma.
Description
Displays class maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
match cos (class map type network-qos)
QOS-25