Cisco Nexus 7000 Series Command Reference Manual page 51

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
mtu
To configure the maximum transmission unit (MTU) size in a network qos policy, use the mtu command.
Syntax Description
mtu_size
Defaults None
Command Modes Policy-map type network qos configuration
Supported User Roles network-admin
vdc-admin
Command History Release
5.1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the MTU size in a network policy:
switch# config t
switch(config)# policy-map type queuing my-4q-4e-drop-out
switch(config-pmap-que)# class type queuing 1p3q1t-8e-out-pq1
switch(config-pmap-que)# priority level 2
switch(config-pmap-que)# mtu 1500
switch(config-pmap-que)#
Related Commands Command
congestion-control
pause
priority
shape
OL-23378-01
mtu [mtu_size]
(Optional) MTU size. The range is from 1500 to 9216.
Modification
This command was introduced.
Description
Configures congestion control in a network qos policy.
Configure no-drop per CoS.
Marks the priority level in a traffic queue.
Configures the traffic rate for a given traffic profile.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
mtu
QOS-41