Set Discard-Class - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

set discard-class

To assign a discard-class value for a class of traffic in a type qos policy map, use the set discard-class
command. To leave the discard-class values unchanged, use the no form of this command.
Syntax Description
discard-value
Defaults
None
Command Modes Policy map type qos class configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines You can set the discard-class value only in ingress policies.
If you configure this value, you cannot configure a value by using the set dscp or the set precedence
Note
command.
This command does not require a license.
Examples This example shows how to assign the discard-class value for a class of traffic in a type qos policy map:
switch(config)# policy-map my_policy1
switch(config-pmap-qos)# class traffic_class2
switch(config-pmap-c-qos)# set discard-class 40
switch(config-pmap-c-qos)#
Related Commands Command
show policy-map
OL-23378-01
set discard-class discard-value
no set discard-class discard-value
Discard-class value to assign for this class of traffic. Valid values are from
0 to 63.
Modification
This command was introduced.
Description
Displays policy maps and statistics.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
set discard-class
QOS-77