Description - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

description

To add a description to a class map, policy map, or table map, use the description command. To remove
the description, use the no form of this command.
Syntax Description
text
Defaults
None
Command Modes Class map type qos configuration
Policy map type qos configuration
Policy map type queuing configuration
Table map configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines This command does not require a license.
Examples
This example shows how to add a description to a policy map:
switch(config)# policy-map my_policy1
switch(config-pmap)# description this policy applies to input packets
switch(config-pmap)#
Related Commands Command
class-map
policy-map
table-map
OL-23378-01
description text
no description text
Description for the class map, policy map, or table map. The description has a
maximum of 200 characters.
Modification
This command was introduced.
Description
Creates or modifies a class map.
Creates or modifies a policy map.
Creates or modifies a table map.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
description
QOS-21