Random-Detect - Cisco Nexus 7000 Series Command Reference Manual

queue-limit
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
The queue limit is not supported on ingress policies on the 10-Gbps interfaces.
Tail drop and weighted random early detection (WRED) cannot be configured in the same class. For
information about configuring WRED, see the
This command does not require a license.
Examples This example shows how to assign a queue limit to a policy map queuing class that applies only to the
specified CoS value:
switch(config)# policy-map type queuing match-first my_queue
switch(config-pmap-que)# class type queuing 1p3q4t-out-pq1
switch(config-pmap-c-que)# queue-limit cos 3 10 mbytes
switch(config-pmap-c-que)#
This example shows how to remove a queue limit from a policy map queuing class:
switch(config)# policy-map type queuing match-first my_queue
switch(config-pmap-que)# class type queuing 1p3q4t-out-pq1
switch(config-pmap-c-que)# no queue-limit cos 3 10 mbytes
switch(config-pmap-c-que)#
Related Commands Command

random-detect

show policy-map
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-66
random-detect
Description
Configures weighted random early detection (WRED).
Displays policy maps and statistics.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
command.
OL-23378-01