Cisco Nexus 7000 Series Command Reference Manual page 52

pause
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
pause
To configure no-drop per class of service (CoS), use the pause command. To remove the no-drop
configuration, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults no pause
Command Modes Class-map type qos configuration
Supported User Roles network-admin
vdc-admin
Command History Release
5.1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure no-drop CoS:
switch# config t
switch(config)# class-map type network-qos match-any eth
switch(config-cmap-nqos)# match cos 0,5-7
switch(config)# class-map type network-qos match-any fc1
switch(config-cmap-nqos)# match protocol fcoe
switch(config-cmap-nqos)# match cos 3
Switch(config)# class-map type network-qos match-any fc2
Switch(config-cmap-nqos)# match cos 1,2,4
switch(config)# policy-map type network-qos my_template
switch(config-pmap-nqos)# class type network-qos eth
switch(config-pmap-nqos-c)# pause
switch(config-pmap-nqos-c)#
Related Commands Command
congestion-control
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-42
pause
no pause
Modification
This command was introduced.
Description
Configures congestion control in a network qos policy.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01