Cisco Nexus 7000 Series Command Reference Manual page 131

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
table-map
To create or modify a table map and enter the table map configuration mode, use the table-map
command. To remove a table map, use the no form of this command.
Syntax Description
table-map-name
default-table-map-name
Defaults None
Command Modes
Global configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines
You cannot modify the system-defined table maps. For a list of the system-defined table maps, see
Note
Table
This command does not require a license.
Examples This example shows how to create or modify a table map:
switch(config)# table-map my_table1
switch(config-tmap)#
This example shows how to remove a table map:
switch(config)# no table-map my_table1
switch(config)#
Related Commands Command
show table-map
OL-23378-01
table-map {table-map-name | default-table-map-name}
no table-map {table-map-name | default-table-map-name}
Name of an existing or new user-defined table map.
Name of a system-defined table map.
Modification
This command was introduced.
5.
Description
Displays table maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
table-map
QOS-121