New And Changed Information - Cisco Nexus 7000 Series Command Reference Manual

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus
7000 Series NX-OS Quality of Service Command Reference, Release 5.x.
To check for additional information about Cisco NX-OS Release 5.1(1), see the Cisco Nexus 7000 Series
NX-OS Release Notes, Release 5.x available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/release/notes/51_nx-os_release_
note.html
Table 1
Service Command Reference, Release 5.x.
Table 1 New and Changed Features for Release 5.1(1)
Feature
Network QoS Policy
Priority Flow Control
Match IPv6
OL-23378-01
summarizes the new and changed features for the Cisco Nexus 7000 Series NX-OS Quality of
Description
Added the ability to define the characteristics
of each CoS value by configuring a network
qos policy.
Added the ability to configure priority flow
control to avoid frame loss due to congestion.
Added the ability to match match IPv6 as well
as IPv4 ACLs.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
Changed in
Release Where Documented
5.1(1) class-map type network-qos
match-any,
congestion-control,
match cos (class map type
network-qos),
mtu,
pause,
policy-map type
qos copy policy-map,
show class-map type
network-qos,
show policy-map system type
network-qos,
show policy-map type
network-qos,
show qos dcbxp
5.1(1) priority-flow-control
show interface
priority-flow-control
4.1(2) match access-group
network-qos,
mode,
v