Cisco Nexus 7000 Series Command Reference Manual page 73

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Usage Guidelines The interfaces that are attached to the shared policer must be on the same module. For an example of
using a shared policer, see the
This command does not require a license.
Examples This example shows configuration of a 2-rate, 3-color shared policer that transmits and sets CoS to 5 if
the data rate is within 200 milliseconds of traffic at 256000 bps, marks DSCP based on the
system-defined table map cir-markdown-map if the data rate exceeds 200 milliseconds of traffic at 512
bps, and drops packets otherwise:
switch(config)# qos shared-policer my_shared_policer cir 256000 pir 512000 conform
set-cos-transmit 5 exceed set dscp dscp table cir-markdown-map violate drop
switch(config)#
Related Commands Command
police aggregate
show policy-map
OL-23378-01
police aggregate
Description
Configures simultaneous policing of the data rates for a particular class of
traffic across multiple interfaces.
Displays policy maps and statistics.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
command.
qos shared-policer
QOS-63