Match Access-Group - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

match access-group

To identify a specified access control list (ACL) group as a match criteria for a class map, use the match
access-group command in the class map configuration mode. To remove ACL match criteria from a class
map, use the no form of this command.
Syntax Description
acl-name
Defaults
None
Command Modes Class-map type qos configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
4.1(2)
Usage Guidelines
The permit and deny ACL keywords do not affect the matching of packets.
Note
This command does not require a license.
Examples This example shows how to create a qos class map that matches characteristics of the ACL my_acl:
switch(config)# class-map class_acl
switch(config-cmap-qos)# match access-group name my_acl
Related Commands Command
show class-map
OL-23378-01
match access-group name acl-name
no match access-group name acl-name
Name of the ACL.
Modification
This command was introduced.
This command was updated to allow matching on IPv6 ACLs and IPv4
ACLs.
Description
Displays class maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
match access-group
QOS-23