Match Cos (Class Map Type Qos) - Cisco Nexus 7000 Series Command Reference Manual

match cos (class map type qos)

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
match cos (class map type qos)
To define the class of traffic using the class of service (CoS) value in a type qos class map, use the match
cos command. To remove the match on the CoS value, use the no form of this command.
Syntax Description
not
cos-list
Defaults None
Command Modes Class-map type qos configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines To specify a list of values, use one of the following options:
•
•
Note Only class maps of type qos support the optional not keyword form of this command. Class maps of type
queuing do not support the not keyword.
This command does not require a license.
Examples
This example shows how to match on the CoS value for a type qos class map:
switch(config)# class-map class_acl
switch(config-cmap-qos)# match cos 5-7
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-26
match [not] cos cos-list
no match [not] cos cos-list
(Optional) Negates the specified match result.
Specified CoS value or list of specified CoS values. Valid values are from 0
to 7.
Modification
This command was introduced.
Specify a range of values by separating each value with a dash.
Specify a noncontiguous list of values by separating each value by a comma.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01