Default (Table Map) - Cisco Nexus 7000 Series Command Reference Manual

default (table map)

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
default (table map)
To specify the default action for mapping input field values to output field values in a table map, use the
default command.
Syntax Description
value
copy
Defaults Copies the input value to the output value.
Command Modes
Table map configuration
Default table map configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0
4.0(2)
Usage Guidelines The copy keyword is available only in the table map configuration mode. In the default table map
configuration mode, the copy keyword is not available because all values must be assigned a mapping.
This command does not require a license.
Examples
This example shows how to remove the default mapping action copy. The resulting default action is
ignore:
switch(config)# table-map my_table1
switch(config-tmap)# no default copy
switch(config-tmap)#
Related Commands Command
from
show table-map
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-20
default {value | copy}
no default {value | copy}
Default value to use for the output value in the range from 0 to 63.
Specifies that the default action is to copy all equal values to an equal output value.
Modification
This command was introduced.
The ignore variable for this command is no longer supported.
Description
Specifies the input field to output field mappings in table maps.
Displays table maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01