Cisco Nexus 7000 Series Command Reference Manual page 104

show interface priority-flow-control
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show interface priority-flow-control
To display the status of priority flow control (PFC) on all interfaces, use the show interface
priority-flow-control command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Any
network-admin 
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.1(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the status of PFC on all interfaces:
switch# show interface priority-flow-control
=====================================
Interface
=====================================
Ethernet5/1
Ethernet5/2
Ethernet5/3
Ethernet5/4
Ethernet5/5
Ethernet5/6
Ethernet5/7
Ethernet5/8
Ethernet5/9
Ethernet5/10
Ethernet5/11
Ethernet5/12
Ethernet5/13
Ethernet5/14
Ethernet5/15
Ethernet5/16
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-94
show interface priority-flow-control
Modification
This command was introduced.
Admin Oper
Auto Off
Auto Off
Auto Off
Auto Off
On On
Auto Off
Auto Off
Auto Off
Auto Off
Auto Off
Auto Off
Auto Off
Auto Off
Auto Off
Auto Off
Auto Off
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01