Installing The Sim Card; Procedure To Install The Internal Sim - Alcatel-Lucent OmniAccess 5840 Installation Manual

3 Components and Power Supply

3.7 Installing the SIM card

The OA58XX router may optionally include a Wireless WAN interface that requires one SIM card to be inserted into
the device. There are certain services (CDMA) provided by several carriers in some countries that do not require SIM
cards.
The OA58XX router has an internal SIM tray.
Warning
This device is compatible with 1.8 V and 3 V SIMs. Do not install SIMs that do not support these
voltages.
Warning
Never install the SIM card when the device is switched on.
Always disconnect the device from the main power supply before inserting the internal SIM.
Always disconnect the device before removing the casing to get to the internal SIM.
When inserting the SIM card, please protect yourself against electrostatic discharges (ESD).
Do not touch the SIM card connectors.

3.7.1 Procedure to install the internal SIM

To access the internal SIM you need to open the device. To do this, you need to remove the device's top panel,
which is held on through screws in the rear and side panels of the device.
Screws on the rear panel
Fig. 39:
Screws on the side panel
Fig. 40:
The internal SIM tray is located towards the rear panel of the device's main printed circuit board.
26
Alcatel-Lucent Enterprise
OA58XX Router