Inverter/Charger Installation
Step 2: Mounting the Inverter
1
Align the flange on the back of the XW Inverter/Charger with the bottom edge of the
mounting plate.
2
Lower the flange on the inverter onto the mounting plate.
CAUTION: Before releasing the full weight of the unit, ensure the inverter is seated
properly on the mounting plate.
3
Secure the top of inverter with two #10 self-tapping screws (supplied).
Figure 2-6 Mounting the XW Inverter/Charger
2–6
1
This manual for use by qualified personnel only
3
2
975-0239-01-01