Connecting the Wiring Harness to the XW Automatic Generator Start
975-0239-01-01
After all the external connections have been wired to the wiring harness, the connector on
the wiring harness must be plugged into the 20-contact connector on the XW Automatic
Generator Start.
To connect the wiring harness to the XW Automatic Generator Start:
◆ With the click-tab on the wiring harness connector on top (away from the mounting
surface), insert the wiring harness connector into the 20-contact connector on the XW
Automatic Generator Start until the tab clicks into place.
Figure 5-11 XW Automatic Generator Start External Connections
This manual for use by qualified personnel only
The XW Automatic Generator Start
20-contact connector
Click Tab
Wiring harness (connection to
generator, thermostats, and
external switches)
5–17