Connecting An External On/Off Led; Figure 5-10 External On/Off Switch And Led Wiring Diagram - Xantrex XW4024-120/240-60 Installation Manual

XW System Accessories Installation

Connecting an External ON/OFF LED

XW Automatic Generator Start

Figure 5-10 External On/Off Switch and LED Wiring Diagram

5–16
Wires 9 (White/Blue) and 11 (Black) on the wiring harness can be connected to an LED or
other light to accompany a remote external ON/OFF switch. This light turns on when the
generator run signal is active to visually indicate that the generator is running.
Important:
With some generators, the generator run signal becomes active during the preheat
stage, before the generator is actually running. In this case, the external ON/OFF LED (and the
Generator On light on the XW Automatic Generator Start) will turn on during the preheat stage and
remain on when the generator is running.
For some generators, these lights will also remain on for a period of time after the generator has
stopped.
2K
2K
5K11
This manual for use by qualified personnel only
7
8
9
10
11
13
START PUSH BUTTON
STOP PUSH BUTTON
EXTERNAL LED
12V OR 24V
EXTERNAL LED
GROUND
975-0239-01-01