Save & Exit - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 3 Useful Features
Save & Exit
If you move the cursor to Save & Exit, the Save & Exit menu appears.
The options of this menu are described below.
(a) Save Changes and Exit
The SETUP utility closes with all the changes saved in NVRAM (Non-volatile memory). After the SETUP
utility closes, the system automatically reboots.
(b) Discard Changes and Exit
The SETUP utility closes without saving the changes in NVRAM. The settings at startup of SETUP utility are
retained.
After the SETUP utility closes, the system automatically reboots.
(c) Save Changes and Power Off
Changes are saved in NVRAM and the SETUP utility closes. After finishing, this server automatically turns
off the power supply.
(d) Discard Changes and Power Off
The SETUP utility closes without saving the changes in NVRAM. The settings at startup of SETUP utility are
retained.
After finishing, this server automatically turns off the power supply.
(e) Load Setup Defaults
This option resets all values in the SETUP utility to the default settings.
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
・The factory-set value may differ from the default value depending on your server
Note
model. Reconfigure each item according to your environment by referring to the
list of settings in this section.
・Values of iSCSI Configuration submenu and UEFI Driver Configuration submenu
do not return to default values.
1. System BIOS
237