Removing Dimm - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 2 Configuring and Upgrading the System

5.5.2 Removing DIMM

Follow the steps below to remove the DIMM.
1. Shutdown OS.
The server turns off automatically.
2. Disconnect the power cords from the outlets.
3. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
4. Remove three screws (two on the front and one on the rear), and remove the top cover of the CPU/IO
module.
5. Remove the air duct.
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
Important At least one DIMM is required to operate the server.
5. Installing Optional Devices
Air duct
185