Save & Exit - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
1.2.6 Save & Exit
If you move the cursor to Save & Exit, the Save & Exit menu appears.
The options of this menu are described below.
（a）Save Changes and Exit
The SETUP utility closes with all the changes saved in NVRAM (Non-volatile RAM). After the SETUP
utility closes, the system automatically reboots.
（b）Discard Changes and Exit
The SETUP utility closes without saving the changes in NVRAM. The settings made before launching
SETUP utility are retained.
After the SETUP utility closes, the system automatically reboots.
（c）Save Changes
Changes are saved in NVRAM.
（d）Discard Changes
The changes will be discarded and the values are reset to the values when SETUP is started.
（e）Load Setup Defaults
This option resets all values in the SETUP utility to the default settings.
90
Note
The factory settings and default values may differ depending on the server model. The
settings must be corrected according to your environment by referring to the list of settings
in this section.
Express5800/B120e-h Maintenance Guide
1. System BIOS