Checking Status Led - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 1 Maintenance
2.3

Checking STATUS LED

Check that the LEDs at front do not indicate error after turning on this server or before shutting down the server.
Check that the LEDs do not indicate error also while operating the system.
Check LED indication when:

Just after turning on the power of the server

While the server is running.

Before shutting down the server.
LEDs to be checked:

LEDs located at front

LEDs on hard disk drives
DISK ACCESS LED
If the indicator shows the server abnormality, contact your sales representative.
For the functions and descriptions of the LED, see Chapter 1 (6.1 Error Indication by LED).
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
Slot 1 Slot 3
Slot 0 Slot 2 Slot 4
Slot 0 Slot 2 Slot 4
Slot 1 Slot 3
System POWER LED
Slot 5 Slot 7
Slot 6
Slot 6
Slot 5 Slot 7
2. Daily Maintenance
System FAULT LED
System FT LED
19