NEC Express5800/R310e-E4 Maintenance Manual page 232

Chapter 3 Useful Features
Option
Chassis Serial Number
BMC Device ID
BMC Device Revision
BMC Firmware Revision
SDR Revision
ASIC Revision
SMM Revision
System MAC Address
(2) Power Control Configuration submenu
From the Server menu, move the cursor to Power Control Configuration and then press the <Enter> key to
show its submenus.
For details about the options, see the table below.
Option
AC-LINK
Delay Time
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
232
Parameter
–
The serial number of chassis is displayed.
–
The device ID of BMC is displayed.
–
The revision of BMC is displayed.
–
The firmware revision of BMC is displayed.
–
The revision of Sensor Data Record is displayed.
– The firmware revision of Fault-tolerant chipset is
displayed.
– The firmware revision of System Management is
displayed.
– The system MAC address is displayed.
Parameter
Stay Off
Specify the AC-LINK function that sets up the power
[Last State]
supply state of this server when AC power is off and then
Power On
supplied (see the table below).
When setting up Power On and Last State, the server
activates until CPU/IO modules are implemented in both
systems in max. 180 seconds in addition to delay time of
the Power On Delay Time.
[50]-600 When the AC-LINK setting is Power On or Last State,
specify DC-ON delay time (sec.) When setting up Power
On, set at 70 seconds or more.
Descriptions
Descriptions
[ ]: Factory settings
1. System BIOS