Procedure In Nec Esmpro Manager - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 1 Maintenance

4.1.2 Procedure in NEC ESMPRO Manager

Follow the steps below to start a component.
1. Choose General of the target component under the ft System tree in Information of server
state/constitution.
2. Check the current status of Status Information in General.
See 4.1.1 Available Status.
3. Choose Maintenance, and then click the Execute button of Bring Up.
Follow the steps below to stop a component.
1. Choose General of the target component under the ft System tree in Information of server
state/constitution.
2. Check the current status of Status Information in General.
See 4.1.1 Available Status.
3. Choose Maintenance, and then click the Execute button of Bring Down.
Sample screen of Maintenance in NEC ESMPRO Manager
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
26

The target component starts after a while.
Tips

The start result can be checked by Status in General of target component.
The result of the start operation is reported by the ft server as an alert.

The target component stops after a while.
Tips

The stop result can be checked by Status in General of target component.
The result of the stop operation is reported by the ft server as an alert.
4. Maintenance of Express5800/ft series