Table of Contents
Advertisement
Chapter 2 Convenient Features
1.2.6 Save & Exit
If you move the cursor to Save & Exit, the Save & Exit menu appears.
The options of this menu are described below.
(a) Save Changes and Exit
The SETUP utility closes with all the changes saved in NVRAM (Non-volatile memory). After the SETUP
utility closes, the system automatically reboots.
(b) Discard Changes and Exit
The SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility is
retained.
After the SETUP utility closes, the system automatically reboots.
(c) Save Changes
Changes are saved in NVRAM.
(d) Discard Changes
The changes are discarded and the settings are reset to the one at startup of SETUP utility.
(e) Load Setup Defaults
This option resets all values in the SETUP utility to the default settings.
74
Note
The default value may differ from factory-set values. Reconfigure each item according to
your environment by referring to the list of settings in this section.
Express5800/E120d-M Maintenance Guide
1. System BIOS
Advertisement
Table of Contents
