NEC Express5800/R310e-E4 Maintenance Manual page 231

Chapter 3 Useful Features
Option
Thermal Sensor
POST Error Pause
Display BMC IP address in
POST
Legacy memory copy
(1)
System Management submenu
From the Server menu, move the cursor to System Management and then press the <Enter> key to show its
submenus.
For details about the options, see the table below (display only).
Option
BIOS Version
UEFI Spec Version
Board Part Number
Board Serial Number
System Part Number
System Serial Number
Chassis Part Number
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
Parameter
Disabled Enable or disable the feature to monitor the thermal sensor.
[Enabled]
[Disabled] Enable or disable the feature to suppress OS booting when
Enabled POST detects an error.
Disabled Enable or disable the feature to display BMC IP address
[Enabled] during POST. (This option is indicated only by R310f-E4,
R320f-M4 and R320f-E4.)
Disabled Specify the memory copying method to other module. Don't
Enabled change this option when there are no directions. (The
factory setting differs depending on the environment you
are using. Also, this option may not be displayed.)
Parameter
–
The current BIOS version is displayed.
－
The UEFI specification version supported by BIOS is
displayed.
–
The part number of motherboard is displayed.
–
The serial number of motherboard is displayed.
–
The part number of the system is displayed.
–
The serial number of the system is displayed.
–
The part number of chassis is displayed.
Descriptions
[ ]: Factory settings
Descriptions
1. System BIOS
231