NEC Express5800/R310e-E4 Maintenance Manual page 94

Chapter 1 Maintenance
[?] The following message appears when logging on the system:

Have you finished license authentication for Windows product?
 The above message will appear if you use Windows product with the unauthenticated license.
Select Get genuine now and proceed to license authentication.
The above message is an example of request for license authentication. The message differs
from this depending on the license.
[?] Failed to duplex CPUs:

Is the memory configuration correct?
 Check if CPUs or memory (DIMM) authorized by NEC is used.
[?] Failed to duplex modules due to difference of BIOS version:

Is ft server utility - System Configuration - Auto Firmware Update disabled?
 Change the setting to Enabled and integrate the module again. The BIOS of primary module is
automatically used for both modules to duplex the modules. It is recommended to reduce the
system load as much as possible.
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
94
8. Troubleshooting