NEC Express5800/R310e-E4 Maintenance Manual page 246

Chapter 3 Useful Features
Item
LDAP
LDAP Authentication
IP Address
Port Number
Search Base
Bind Domain Name
Bind Password
*1: Can be specified if a user exists.
*2: Up to 15 characters including alphanumeric, hyphen (-), and underscore (_) can be used. Note, however, User
Name must start start with hyphen (-). In addition, "root", "null", "MWA", "AccessByEM-Poem", and names
which are already assigned for other number are not allowed.
*3: Up to 19 ASCII characters excluding " " (blank), " (quotation), & (ampersand), ? (question mark), = (equal sign),
#, and \, can be used.
*4: Privileges are defined as follows:
Administrator: User who has administrator right. All operations are allowed.
Operator:
User:
*5: Can be specified only when Active Directory authentication is set to "Enable".
*6: Up to 255 characters including alphanumeric, hyphen, underscore, and period can be used.
*7: If Active Directory authentication is set to "Enable", at least one domain controller server must be enabled.
*8: Can be specified only when domain controller server is set to "Enable".
*9: Can be specified only when LDAP authentication is set to "Enable".
*10: Characters in the range between 4 and 62 including alphanumeric, hyphen, underscore, period, comma, and
equal sign can be used.
*11: Alphanumeric characters in the range between 4 and 31 excluding ", #, and \ can be used.
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
246
Enable or disable LDAP authentication.
Specify the IP address.
Specify the LDAP port number.
Specify the search base used in LDAP authentication.
Specify the bind domain used in LDAP authentication.
Specify the bind password used in LDAP authentication.
User who can operate the machine. Session management, license registration, remote
KVM/media, configuration, and update are not allowed.
General user. Viewing IPMI information only is allowed.
If you use Japanese keyboard and select "JAPANESE - Keyboard" at the chapter "2.2
Tips
Activating BMC Configuration", you can input underscore(_) by pressing <Shift> + <^> key.
Description
*9
*9
*9 *10
*9 *10
2. BMC Configuration
Default
Value
Enable
0.0.0.0
636
Blank
Blank
*9 *11
Blank