Resetting And Clearing The Server - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 1 Maintenance
10.3
Clearing BIOS Settings (CMOS Memory)
To set the BIOS settings back to the factory settings (clearing CMOS memory), use the jumper switch.
You can also clear the password of BIOS Setup Utility (SETUP) by using the jumper switch.
To clear the password or the CMOS memory, use the corresponding jumper switch illustrated in the figure
below.
PASSWORD Clear Jumper
(PASSCLR)
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
114
Usually, select Load Setup Defaults in BIOS Setup Utility (SETUP) to return the
Tips
settings to the factory settings.
Important Do not change any other jumper switch. Any change will cause the server to
fail or malfunction.
Protect (factory setting)
Clear

10. Resetting and Clearing the Server

CMOS Clear Jumper (CMOSCLR)
Protect (factory setting)
Clear