Starting And Stopping The Components; Available Status - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 1 Maintenance
4.1

Starting and Stopping the Components

If the component of ft server fails or needs to be replaced, you can forcibly stop the component. The stopped
component can also be restarted.

4.1.1 Available status

You can start or stop the component of ft server when the status of component is the following state.
Component
CPU module
PCI module
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
Important Use this feature to stop the relevant CPU module and PCI module before replacing
component.
Can Start
・Power supply stop
・Broken
・Forced stop
・Firmware Update Complete
・Diagnostics Passed
・Power supply stop
・Broken
・Forced stop
・Firmware Update Complete
・Diagnostics Passed
You can view the state of component by NEC ESMPRO Manager or ft server utility.
Tips
4. Maintenance of Express5800/ft series
Status of component
Can Stop
・Duplex
・Duplex
25