Setup Of Optional Pci Card - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 2 Configuring and Upgrading the System

5.7.5 Setup of Optional PCI Card

(1)
N8804-011 10GBASE-T 1ch Adapter Kit and N8804-012 1000BASE-T 2ch Adapter Kit

Slots to install optional PCI cards
See "List of option PCI cards and installable slots" in Chapter 2 (5.7.1 Precautions).

Driver installation procedure
Install N8804-011 10GBASE-T 1ch Adapter Kit or N8804-012 1000BASE-T 2ch Adapter Kit, and restart the
server. After starting the server, the driver will be installed automatically. At this time, the [New hardware is
found] window may be displayed.

Configure duplex LAN
See Chapter 2 (3. Duplex LAN Configuration).

Configure network
Follow steps below to specify transfer speed and duplex mode for the driver.
(1) Launch Device Manager.
(2) Expand network adapter tree and double-click Added NIC.
The Properties dialog box of network adapter appears.
The name of LAN card is as follows:
Stratus I350 2-Port Gigabit Adapter
Stratus X540 1-Port Copper 10 Gigabit Adapter
(3) Select the Link speed tab, and configure the settings of Speed and Duplex to match those of
the hub.
(4) Click OK on the dialog box.
(5) Configure another network adapter in the same manner.
Add/remove protocol or services if needed. On Network Connections, go to Local Area connection or
Ethernet property's dialog box.
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
200
To enable the fault-tolerant feature of the optional device, the identical PCI cards
Important
must be installed to the slots with the same number in CPU/IO module 0 and CPU/IO
module 1.
For the supported connecting devices, contact your sales agent.
Important For LAN cable's connector, use a RJ-45 connector which is compliant with IEC8877
standard. If any other connector is used, it may not be removed easily.
It is recommended to add Network monitor as one of the services.
Note
Network monitor can monitor frames (or packets) sent or received by a computer where
Network monitor is installed. This is a useful tool to analyze network failure.
5. Installing Optional Devices