Procedure In Nec Esmpro Manager - NEC Express5800/R310e-E4 Maintenance Manual

Chapter 1 Maintenance

4.2.2 Procedure in NEC ESMPRO Manager

Follow the steps below to clear the MTBF of component.
1. Choose General of the target component under the ft System tree in Information of server
state/constitution.
2. Check the current status of Status Information in General.
See 4.2.1 Available Status.
3. Choose Maintenance, and then click the Execute button of MTBF Clear.
4. Start the target component.
Sample screen of Maintenance in NEC ESMPRO Manager
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
The MTBF clearing result can be checked by Status Information in General on the target
Tips
component screen. The result of the MTBF clearing operation is reported by the ft server
as an alert.
4. Maintenance of Express5800/ft series
29