Table of Contents
Advertisement
Chapter 1 Maintenance
9.
Windows System Recovery
Recover the Windows system by following the instructions below if the files necessary to operate Windows are
corrupt.
9.1
Recovery of Windows Server 2016
If the Windows does not start normally, you can recover it using the feature of the Windows installation disc.
To run this feature, start the installation disc, and then choose Repair your computer in Windows Setup
wizard.
We recommend that this option is performed by the system administrator.
9.2
Recovery of Windows Server 2012 R2
If the Windows does not start normally, you can recover it using the feature of the Windows installation disc.
To run this feature, start the installation disc, and then choose Repair your computer in Windows Setup
wizard.
We recommend that this option is performed by the system administrator.
9.3
Recovery of Windows Server 2008 R2
If Windows does not start for some reason, you can recover Windows using the system recovery option.
Be sure to perform this operation under the supervision of a user or administrator who has a thorough
knowledge of this option. For details, refer to Windows Help.
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
112
When you boot from OS installation disc, it may affect on area in partition
Important
outside of duplexing disks by the RDR function (BCD area) and it may cause
system fault at starting the system.
When it is necessary to boot from OS installation disc, pull out one side or both
side of the disks from inserted disks which is duplexing by the RDR function
before boot.
Note
After recovering the system, be sure to install each driver and Starter Pack according
to Chapter 1 (Installing Starter Pack) in "Installation Guide (Windows)".
If hard disk drives cannot be found, you cannot recover the Windows system.
9. Windows System Recovery
- Quick Links:
- Manuals
Hide quick links:
Advertisement
Table of Contents
