Advanced Settings; Performance - D-Link DAP-3410 User Manual

Section 3 - Configuration
This options on this page will allow you to fine tune the
wireless connectivity of the access point.
Wireless: Use the drop-down menu to turn the wireless
function On or Off.
Wireless Mode: The different combination of clients that can
be supported include Mixed. 802.11n, and
802.11n.Only.
Data Rate: Set the base transfer rate of wireless adapters
on the wireless LAN. The AP will adjust the base
transfer rate depending on the base rate of
the connected device. This option is enabled
in Mixed. 802.11g. and. 802.11b mode. The
choices available are Best.(Up.to.54), 54, 48,
36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1.
Beacon
Beacons are packets sent by an access point
Interval:
to synchronize a wireless network. Specify
a value in milliseconds. The default (100)
is recommended. Setting a higher beacon
interval can help to save the power of wireless
clients, while setting a lower one can help a
wireless client connect to an access point faster.
DTIM Interval
Set a Delivery Traffic Indication Message
setting between 1 and 255. The default value
is 1. DTIM is a countdown informing clients of
the next window for listening to broadcast and
multicast messages.
D-Link DAP-3410 User Manual

Advanced Settings

Performance

24