DAP-1360U Wireless N300 Access Point & Router
User Manual
Advanced
In this menu you can configure advanced settings of the access point:
create groups of ports for VLANs
•
add name servers
•
configure a DDNS service
•
configure autonegotiation or manually configure speed and duplex mode for each Ethernet
•
port of the access point
setup the rate limit for traffic transmitted from every port of the access point
•
define static routes
•
create rules for remote access to the web-based interface
•
enable the UPnP IGD protocol
•
allow the access point to use IGMP
•
allow the access point to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
•
through functions for the access point.
Page 109 of 158
Configuring via Web-based Interface