Chapter 3: System Setup; Removing The Top Cover - Nexcom NISE 300 User Manual

Chapter 3: System Setup

Chapter 3: System Setup

Removing the Top Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
1. Locate the 2 screws on the back of the top cover and remove them.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
2. Lift up the cover and remove it from the chassis.
37
NISE 300 User Manual