Serial Port 1 Configuration; Serial Port 2 Configuration - Nexcom NISE 300 User Manual

Chapter 4: BIOS Setup

Serial Port 1 Configuration

This section is used to configure serial port 1.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Change Settings [IO=2F8h; IRQ=3;]
[RS232]
Onboard Serial Port 1 Mode
Onboard Serial Port Max Baud Rate [115200 bps]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Onboard Serial Port 1 Mode
Select this to change the serial port mode to RS232, RS422, RS485 or RS485
Auto.
Onboard Serial Port Max Baud Rate
Select this to change the max baud rate of the serial port.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

Serial Port 2 Configuration

This section is used to configure serial port 2.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
RS485 Auto Direction
Enables or disables RS485 auto direction.
Onboard Serial Port Max Baud Rate
Select this to change the max baud rate of the serial port.
65
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=3E8h; IRQ=6;
Change Settings [IO=3E8h; IRQ=6;]
[Disabled]
RS485 Auto Direction
Onboard Serial Port Max Baud Rate [115200 bps]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 300 User Manual