Nexcom NISE 300 User Manual page 87

Chapter 4: BIOS Setup
LCD Control
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [DVI]
Secondary IGFX Boot Display [Disabled]
LCD Panel Type [1280x1024 Dual 24bit]
Active LFP [No LVDS]
Panel Color Depth [18 Bit]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
Secondary IGFX Boot Display
Select the secondary display device.
LCD Panel Type
Select the LCD panel used by the internal graphics device by selecting the
appropriate setup item.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Active LFP
Select the Active LFP configuration.
No LVDS
Int-LVDS
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present. Secondary boot
Panel Color Depth
display selection will appear
based on your selection.
Select the LFP Panel Color Depth.
VGA modes will be supported
only on primary display
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
73
VBIOS does not enable LVDS.
VBIOS enables LVDS driver by Integrated encoder.
NISE 300 User Manual