Chapter 3: System Setup; Removing The Chassis Cover - Nexcom NISE 51-J3455 User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's
CAUTION! CAUTION!
CAUTION! power is off and disconnected from the power sources to
prevent electric shock or system damage.
1. Remove the six mounting screws around the chassis cover. There are two
screws each on the top and on the sides.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
29
2. With the screws removed, lift up the cover and remove it from the chassis.
Screws on the sides
NISE 51/NISE 51-J3455/NISE 51-E3930 User Manual