Chapter 3: System Setup; Removing The Chassis Cover - Nexcom NISE 50 User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's
CAUTION! CAUTION!
CAUTION! power is off and disconnected from the power sources to
prevent electric shock or system damage.
1. Remove the six mounting screws around the chassis cover. There are two
screws each on the top and on the sides.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
32
2. With the screws removed, lift up the cover and remove it from the chassis.
Screws on the sides
NISE 50 and NISE 50W User Manual