Appendix A: Power Consumption - Nexcom NISE 300 User Manual

Appendix A: Power Consumption

Appendix A: Power Consumption
NISE 300 Power Consumption Table
Purpose
The purpose of the power consumption test is to verify the power dissipation
of system, and the loading of power supply.
Test Equipment/Software
▪ PROVA CM-07 AC/DC CLAMP METER
Device Under Test
▪ DUT: sys#1
Test Procedure
1. Power up the DUT, boot into Windows 7 x64 Ultimate
2. Entering standby mode (HDD power down)
3. Measure the power consumption and record it.
4. Run Burn-in test program to apply 100% full loading
5. Measure the power consumption and record it.
Test Result
(Disabled Turbo Boot)
Full-Loading Mode
Total
Standby S3Mode
Total
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Sys #1 Sys #1
(Disabled Turbo Boot)
+19V +30V
2.49A 1.61A
47.31W 48.3W
0.13A 0.11A
2.47W 3.3W
Test Equipment/Software
System
Configuration
Chassis CHASSIS NISE300 VER:B
CPU Intel® Core™ i5-4402E Processor (3M Cache, up to 2.70 GHz)
Memory Transcend 4GB DDR3 1600 SO-DIMM (TS512MSK64V6H) X2
CPU board N/A
Mother board NISB300 REV:B
HDD HDD 2.5" SATA 160GB HITACHI:HTS545016B9A300 X2
FDD N/A
CD-ROM N/A
CFast Apacer CFast 32GB
Power Supply POWER ADAPTER FSP120-ACB 120W 24V/5A w/PSE MARK
Add-on Card mSATA (TS128GMSA740), NISK300LAN (x2), Sierra 8790V
CPU Cooler NISE300 CPU HEATSINK SHYUNG SHUHN
System FAN N/A
Keyboard Microsoft Wired Keyboard 600
Mouse Microsoft Basic Optical Mouse
Monitor ASUS VS228
79
Sys#1
NISE 300 User Manual