Viewing Qos Priority Queue Statistics - Cisco FirePOWER ASA 5500 series Configuration Manual

Chapter 24 Applying QoS Policies
For example, the following command displays service policies that include the priority command and
the related statistics; for example:
hostname# show service-policy priority
Global policy:
Interface outside:
"Aggregate drop" denotes the aggregated drop in this interface; "aggregate transmit" denotes the
Note
aggregated number of transmitted packets in this interface.

Viewing QoS Priority Queue Statistics

To display the priority-queue statistics for an interface, use the show priority-queue statistics command
in privileged EXEC mode. The results show the statistics for both the best-effort (BE) queue and the
low-latency queue (LLQ). The following example shows the use of the show priority-queue statistics
command for the interface named test, and the command output:
hostname# show priority-queue statistics test
Priority-Queue Statistics interface test
Queue Type
Packets Dropped
Packets Transmit
Packets Enqueued
Current Q Length
Max Q Length
Queue Type
Packets Dropped
Packets Transmit
Packets Enqueued
Current Q Length
Max Q Length
hostname#
In this statistical report, the meaning of the line items is as follows:
•
•
•
•
•
OL-10088-01
Service-policy: global_fw_policy
Service-policy: qos
Class-map: TG1-voice
Priority:
Interface outside: aggregate drop 0, aggregate transmit 9383
= BE
= 0
= 0
= 0
= 0
= 0
= LLQ
= 0
= 0
= 0
= 0
= 0
"Packets Dropped" denotes the overall number of packets that have been dropped in this queue.
"Packets Transmit" denotes the overall number of packets that have been transmitted in this queue.
"Packets Enqueued" denotes the overall number of packets that have been queued in this queue.
"Current Q Length" denotes the current depth of this queue.
"Max Q Length" denotes the maximum depth that ever occurred in this queue.
Cisco Security Appliance Command Line Configuration Guide
Viewing QoS Statistics
24-15