Ctiqbe Inspection - Cisco FirePOWER ASA 5500 series Configuration Manual

Chapter 25 Configuring Application Layer Protocol Inspection
Table 25-2
Keywords
skinny [map_name]
snmp [map_name]
sqlnet
sunrpc
tftp
xdmcp
To activate the policy map on one or more interfaces, enter the following command:
Step 6
hostname(config)# service-policy policymap_name {global | interface interface_name}
Where global applies the policy map to all interfaces, and interface applies the policy to one interface.
By default, the default policy map, "global_policy," is applied globally. Only one global policy is
allowed. You can override the global policy on an interface by applying a service policy to that interface.
You can only apply one policy map to each interface.

CTIQBE Inspection

This section describes CTIQBE application inspection. This section includes the following topics:
•
•
•
CTIQBE Inspection Overview
CTIQBE protocol inspection supports NAT, PAT, and bidirectional NAT. This enables Cisco IP
SoftPhone and other Cisco TAPI/JTAPI applications to work successfully with Cisco CallManager for
call setup across the security appliance.
TAPI and JTAPI are used by many Cisco VoIP applications. CTIQBE is used by Cisco TSP to
communicate with Cisco CallManager.
OL-10088-01
Protocol Keywords
CTIQBE Inspection Overview, page 25-9
Limitations and Restrictions, page 25-10
Verifying and Monitoring CTIQBE Inspection, page 25-10
Notes
If you added a Skinny inspection policy map according to
"Configuring a Skinny (SCCP) Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
If you added an SNMP inspection policy map according to
"SNMP Inspection" section on page
name in this command.
—
The default class map includes UDP port 111; if you want to
enable Sun RPC inspection for TCP port 111, you need to
create a new class map that matches TCP port 111, add the
class to the policy, and then apply the inspect sunrpc
command to that class.
—
—
Cisco Security Appliance Command Line Configuration Guide
CTIQBE Inspection
25-69,
25-72, identify the map
25-9