Configuring Switch Ports And Vlan Interfaces For The Cisco Asa 5505 Adaptive Security Appliance; Interface Overview - Cisco FirePOWER ASA 5500 series Configuration Manual

Security appliance command line
Hide thumbs Also See for FirePOWER ASA 5500 series:
Table of Contents

Advertisement

Configuring Switch Ports and VLAN Interfaces
for the Cisco ASA 5505 Adaptive Security
Appliance
This chapter describes how to configure the switch ports and VLAN interfaces of the ASA 5505 adaptive
security appliance.
To configure interfaces of other models, see
Note
Subinterfaces,"
This chapter includes the following sections:

Interface Overview

This section describes the ports and interfaces of the ASA 5505 adaptive security appliance, and includes
the following topics:
OL-10088-01
and
Chapter 7, "Configuring Interface Parameters."
Interface Overview, page 4-1
Configuring VLAN Interfaces, page 4-5
Configuring Switch Ports as Access Ports, page 4-9
Configuring a Switch Port as a Trunk Port, page 4-11
Allowing Communication Between VLAN Interfaces on the Same Security Level, page 4-13
Understanding ASA 5505 Ports and Interfaces, page 4-2
Maximum Active VLAN Interfaces for Your License, page 4-2
Default Interface Configuration, page 4-3
VLAN MAC Addresses, page 4-4
Power Over Ethernet, page 4-4
Security Level Overview, page 4-5
C H A P T E R
Chapter 5, "Configuring Ethernet Settings and
Cisco Security Appliance Command Line Configuration Guide
4
4-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pix 500 seriesCisco asa 5500 series

Table of Contents