Transferring An Image Onto An Ssm - Cisco FirePOWER ASA 5500 series Configuration Manual

Transferring an Image onto an SSM

0 ASA 5520 Adaptive Security Appliance
1 ASA 5500 Series Security Services Module-20
Mod MAC Address Range
--- --------------------------------- ------------ ------------ ---------------
0 000b.fcf8.c30d to 000b.fcf8.c311
1 000b.fcf8.012c to 000b.fcf8.012c
Mod SSM Application Name
--- ------------------------------ --------------------------
1 Trend Micro InterScan Security Version 5.0
Mod Status
--- ------------------ --------------------- -------------
0 Up Sys
1 Up
The argument 1, at the end of the command, is the slot number occupied by the SSM. If you do not know
the slot number, you can omit it and see information about all modules, including the adaptive security
appliance, which is considered to occupy slot 0 (zero).
Use the details keyword to view additional information for the SSM.
The follow example output is from an adaptive security appliance with a CSC SSM installed.
hostname# show module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Security Services Module-20
Model:
Hardware version:
Serial Number:
Firmware version:
Software version:
App. name:
App. version:
Data plane Status:
Status:
HTTP Service:
Mail Service:
FTP
Activated:
Mgmt IP addr:
Mgmt web port:
Transferring an Image onto an SSM
For an intelligent SSM, such as AIP SSM or CSC SSM, you can transfer application images from a TFTP
server to the SSM. This process supports upgrade images and maintenance images.
If you are upgrading the application on the SSM, the SSM application may support backup of its
Note
configuration. If you do not back up the configuration of the SSM application, it is lost when you transfer
an image onto the SSM. For more information about how your SSM supports backups, see the
documentation for your SSM.
Cisco Security Appliance Command Line Configuration Guide
22-14
Hw Version
1.0 1.0(10)0
1.0 1.0(10)0
SSM Application Version
Data Plane Status Compatability
Not Applicable
Up
ASA-SSM-20
1.0
0
1.0(10)0
Trend Micro InterScan Security Module Version 5.0
Trend Micro InterScan Security Module
Version 5.0
Up
Up
Up
Up
Service: Up
Yes
10.23.62.92
8443
ASA5520 P3000000034
ASA-SSM-20 0
Fw Version Sw Version
7.1(0)1
Trend Micro InterScan Security Module Version 5.0
Chapter 22 Managing AIP SSM and CSC SSM
OL-10088-01