Example 9: Primary Admin Context Configuration - Cisco FirePOWER ASA 5500 series Configuration Manual

Example 9: LAN-Based Active/Active Failover (Routed Mode)
boot system flash:/cdisk.bin
mac-address auto
interface Ethernet0
description LAN/STATE Failover Interface
interface Ethernet1
no shutdown
interface Ethernet2
no shutdown
interface Ethernet3
no shutdown
interface Ethernet4
no shutdown
interface Ethernet5
no shutdown
interface Ethernet6
no shutdown
interface Ethernet7
no shutdown
interface Ethernet8
no shutdown
interface Ethernet9
no shutdown
failover
failover lan unit primary
failover lan interface folink Ethernet0
failover link folink Ethernet0
failover interface ip folink 10.0.4.1 255.255.255.0 standby 10.0.4.11
failover group 1
primary
preempt
failover group 2
secondary
preempt
admin-context admin
context admin
description admin
allocate-interface Ethernet1
allocate-interface Ethernet2
config-url flash:/admin.cfg
join-failover-group 1
context ctx1
description context 1
allocate-interface Ethernet3
allocate-interface Ethernet4
config-url flash:/ctx1.cfg
join-failover-group 2

Example 9: Primary admin Context Configuration

enable password frek
password elixir
hostname admin
interface Ethernet1
nameif outside
security-level 0
ip address 192.168.5.101 255.255.255.0 standby 192.168.5.111
interface Ethernet2
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0 standby 192.168.0.11
monitor-interface outside
monitor-interface inside
Cisco Security Appliance Command Line Configuration Guide
B-24
Appendix B Sample Configurations
OL-10088-01